eSIM installation manual

1. Make sure you have access to the internet on your device


2. Get a notification from T-Mobile and press it


3. Tap "Add eSIM"


4. Finish other settings (e.g. select a preferred line)
   
   
5. Check the on/off status of your physical SIM and NXTSIM eSIM as follows:
   When you're in the U.S.: Turn off your "existing line (the line you normally use)" and turn on the "T-Mobile line
   
   
6. Rester your phone and star using NXTSIM!
   
   

• When you delete the notification:
  "Settings" → "Cellular" → "Add eSIM" → Follow the instructions on your device to complete the setup
  
  
• When the QR Code option is displayed:
  "Settings" → "Use QR Code" → "Enter Details Manually" → Enter SM-DP-address: "T-MOBILE.GDSB.NET" → "Next" on the upper right

*DO NOT delete eSIM; otherwise, you will not be able to add eSIM again

*The desplays may vary depending on your device model

1. Make sure you have access to the internet on your device
   
   
2. Go to "settings" → Select "Network and internet"→ Select "Mobile network"


3. Choose "Add mobile plan"
   (If the carrier is displayed, please select "T-Mobile")


4. Tap "Enter Code Manually" and enter the SM-DP+Adress below
   
   SM-DP+Adress: T-MOBILE.GDSB.NET


5. Go to "Mobile Networ" and turn on T-Mobile, and enable "Mobile data"
   
   
6. Rester your phone and star using NXTSIM!

*If you cannot connect to the internet after waiting for about 5 minutes, APN (Mobile Network) settings may be required

1. In the "Settings", select "APN settings" and manually enter the following information:
   
   Name: T-Mobile
   APN: Fast.t-mobile.com
   
   
2. Select the save button, and if "T-Mobile" appears in the APN list, select it


3. Restart your device
   
   
   *For APN setting instructions specific to your device model, please refer to the official T-Mobile website. You can view the steps by selecting your device model and the service "APN."